Roland VersaCamm SP-300V User Manual

70
Chapter 4 Feature Reference
4-4 Accommodating Various Kinds of Media
Using Transparent Media
Procedure
➊
Press .
➋
Press .
Use
to select "DISABLE."
Press
to enable the setting.
➌
Press to go back to the original screen.
Description
The machine automatically senses the leading edge and trailing edge of opaque media, but cannot sense transparent
media. In this case, disable this sensing feature. When printing transparent media, ensure a margin of 80 mm (3-3/16
in.) or more from the leading edge of the media to the start position for printing or cutting.
Default Setting
[EDGE DETECTION] : ENABLE
Printing Hard-to-dry Media
Procedure
➊
Press .
Press
several times.
➋
Press .
Use
to set the value.
Press
.
➌
Press to go back to the original screen.
MENU
EDGE DETECTION
EDGE DETECTION
ENABLE DISABLE
MENU
SCAN INTERVAL
SCAN INTERVAL
OFF 1.0sec.
W 500mm
SETUP SHEET
W 500mm
SETUP SHEET

Roland VersaCamm SP-300V Specifications

General

Resolution	Up to 1440 dpi
Connectivity	USB
Print Technology	Piezoelectric Inkjet
Media Handling	Roll-fed
Ink Colors	Cyan, Magenta, Yellow, Black
Media Thickness	Max. 1.0 mm (39 mil) with liner
Media Types	Vinyl, banner, paper, film
Power Requirements	AC 100 to 120 V ±10 %, 50/60 Hz
Operating Environment	Temperature: 20-32°C, Humidity: 35-80% (non-condensing)