Roland VersaCamm SP-300V User Manual

36
Chapter 2 Operation
2-5 If Ink Runs Out
Checking for Remaining Ink
Procedure
➊
Press .
Press
several times.
➋
Press .
➌
Press to go back to the original screen.
The display shows an approximate guide to the amount of remaining ink, which may differ somewhat from the
actual amount remaining. Also, the displayed information may differ greatly from the actual amount remaining if
you insert a partly used ink cartridge or change cartridges while the power is off.
1 ■■ 2 ■■ 3 ■■ 4 ■■
W 500mm
Cartridge slot number
1 ■■ 2 ■■ 3 ■■ 4 ■■
Much
Amount of ink remaining:
Little
MENU
INK REMAINING
SETUP SHEET

Roland VersaCamm SP-300V Specifications

General

Resolution	Up to 1440 dpi
Connectivity	USB
Print Technology	Piezoelectric Inkjet
Media Handling	Roll-fed
Ink Colors	Cyan, Magenta, Yellow, Black
Media Thickness	Max. 1.0 mm (39 mil) with liner
Media Types	Vinyl, banner, paper, film
Power Requirements	AC 100 to 120 V ±10 %, 50/60 Hz
Operating Environment	Temperature: 20-32°C, Humidity: 35-80% (non-condensing)