Roland VersaCamm SP-300V User Manual

78
4-5 Changing How the Printer Operates
Chapter 4 Feature Reference
Returning All Settings to Their Initial Values
Procedure
Press
.
Press
several times.
Press
to execute.
Stopping Media Feed After Printing
Procedure
➊
Press .
Press
several times.
➋
Press .
Use
to select "DISABLE."
Press
to enable the setting.
➌
Press to go back to the original screen.
Description
Under the factory-default settings, after printing has finished the machine performs feed to position the trailing edge of
the media above the dryer, then dries the ink. The machine then feeds or takes up the media to move it to the next
output-start location, then stops. Setting this to "DISABLE" eliminates such media feed or take-up operation after
printing.
Default Setting
[FEED FOR DRY] : ENABLE
MENU
FACTORY DEFAULT
MENU
FEED FOR DRY
FEED FOR DRY
ENABLE DISABLE
W 500mm
SETUP SHEET

Roland VersaCamm SP-300V Specifications

General

Resolution	Up to 1440 dpi
Connectivity	USB
Print Technology	Piezoelectric Inkjet
Media Handling	Roll-fed
Ink Colors	Cyan, Magenta, Yellow, Black
Media Thickness	Max. 1.0 mm (39 mil) with liner
Media Types	Vinyl, banner, paper, film
Power Requirements	AC 100 to 120 V ±10 %, 50/60 Hz
Operating Environment	Temperature: 20-32°C, Humidity: 35-80% (non-condensing)