Roland VersaCamm SP-300V User Manual

4-4 Accommodating Various Kinds of Media
Chapter 4 Feature Reference
74
How to Load Sheet Media
When loading sheet media, such as standard-size media, be sure to carry out the following procedure.
Procedure
➊
Remove both shafts.
If roll media is loaded, then remove the media first.
➋
Pass the media through the machine.
➌
Align the front edge of the media with the loca-
tion shown in the figure.
➍
Lower the loading lever to secure the media in place.
➎
If you're performing printing, set the media clamps.
➏
Close the front cover.
See also the following pages.
☞
p 26 "How to Load Roll Media"
Align the front edge with the location shown in the figure.
.Media

Roland VersaCamm SP-300V Specifications

General

Resolution	Up to 1440 dpi
Connectivity	USB
Print Technology	Piezoelectric Inkjet
Media Handling	Roll-fed
Ink Colors	Cyan, Magenta, Yellow, Black
Media Thickness	Max. 1.0 mm (39 mil) with liner
Media Types	Vinyl, banner, paper, film
Power Requirements	AC 100 to 120 V ±10 %, 50/60 Hz
Operating Environment	Temperature: 20-32°C, Humidity: 35-80% (non-condensing)