Roland VersaUV LEF2-300 User Manual

Maintenance of Ink Cartridges
The precipitaon of the ingredients in the ink disables prinng in normal color. So that the ink mixes well, shake
the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink cartridge.
• Remove the white ink cartridge, shake it 50 mes (about 20 seconds), and then reinsert this cartridge.
• The ink cartridges for colors other than white do not need to be shaken before every operaon, but be sure to
shake them when installing new ones.
The ingredients in white ink tend to sele. Each day, before starng the day's operaons, be sure to shake this
cartridge. Allowing the ink to stand without carrying out these steps can cause the seled material to harden,
resulng in malfuncon or other problems.
IMPORTANT
• Before shaking the ink cartridge, wipe o any ink from around its mouth. If you do not wipe o the ink, it may splaer when you
shake the ink cartridge.
• When you have nished mixing the ink, reaach the ink cartridge immediately. Taking me to reaach the ink cartridge will ad-
versely aect the ink path.
• Even if you are not using the printer, shake the white ink cartridge 50 mes (about 20 seconds) once a week.
Maintenance That Must Be Performed Daily
2. Regular Maintenance 155

Roland VersaUV LEF2-300 Specifications

General

Printing Technology	Piezo inkjet
Ink Configuration	CMYK + White + Clear
Ink Colors	Cyan, Magenta, Yellow, Black, White, Clear
Connectivity	USB 2.0, Ethernet
Maximum Print Width	780 mm
Maximum Media Width	800 mm
Print Resolution	1440 x 1440 dpi
Media Thickness	Up to 200 mm
Maximum Media Thickness	50 mm
Ink Type	UV Ink
Ink Droplet Size	Variable dot
Power Supply	100-240V AC, 50/60Hz
Power Requirements	100-240V AC, 50/60Hz
Power Consumption	600W
Dimensions	1, 318 (W) x 983 (D) x 705 (H) mm 51.9 (W) x 38.7 (D) x 27.8 (H) in.
Dimensions (W x D x H)	1190 x 940 x 290 mm
Weight	128 kg