Roland VersaUV LEF2-300 User Manual

Notes When the Print Surface Is Uneven
This machine can also print on uneven surfaces. However, remember the following points for the height seng.
The gap between the "highest posion of the object to be printed on" ( ) and the "lowest posion of the print
surface" ( ) should be 2 mm (78.7 mil) or less ( ; as a general guide).
Print quality at the lower posion degrades as the height gap widens.
Prinng on a surface ( ) that is perpendicular to the print heads ( ) is not possible.
Adjusting the Height
78 1. Optimizing the Setup Method

Roland VersaUV LEF2-300 Specifications

General

Printing Technology	Piezo inkjet
Ink Configuration	CMYK + White + Clear
Ink Colors	Cyan, Magenta, Yellow, Black, White, Clear
Connectivity	USB 2.0, Ethernet
Maximum Print Width	780 mm
Maximum Media Width	800 mm
Print Resolution	1440 x 1440 dpi
Media Thickness	Up to 200 mm
Maximum Media Thickness	50 mm
Ink Type	UV Ink
Ink Droplet Size	Variable dot
Power Supply	100-240V AC, 50/60Hz
Power Requirements	100-240V AC, 50/60Hz
Power Consumption	600W
Dimensions	1, 318 (W) x 983 (D) x 705 (H) mm 51.9 (W) x 38.7 (D) x 27.8 (H) in.
Dimensions (W x D x H)	1190 x 940 x 290 mm
Weight	128 kg