Roland VersaUV LEF2-300 User Manual

When using a jig: Hole posions for the head refresher
Unit: mm
A
B
C
D
625
0
659 790 800
0
110
• A, B, C, D: Head refresher leg posions
When using the prinng jig, open a hole with a diameter of 8 mm (0.3 in.) in each of the above posions to
enable the installaon of the head refresher.
You can select posion A from the four locaons shown below.
A
625
635 665
645
0
0
110
90
Dimensional Drawings
3. Main Specifications 269

Roland VersaUV LEF2-300 Specifications

General

Printing Technology	Piezo inkjet
Ink Configuration	CMYK + White + Clear
Ink Colors	Cyan, Magenta, Yellow, Black, White, Clear
Connectivity	USB 2.0, Ethernet
Maximum Print Width	780 mm
Maximum Media Width	800 mm
Print Resolution	1440 x 1440 dpi
Media Thickness	Up to 200 mm
Maximum Media Thickness	50 mm
Ink Type	UV Ink
Ink Droplet Size	Variable dot
Power Supply	100-240V AC, 50/60Hz
Power Requirements	100-240V AC, 50/60Hz
Power Consumption	600W
Dimensions	1, 318 (W) x 983 (D) x 705 (H) mm 51.9 (W) x 38.7 (D) x 27.8 (H) in.
Dimensions (W x D x H)	1190 x 940 x 290 mm
Weight	128 kg