EasyManuals Logo

Roland VersaUV LEF2-300 User Manual

Roland VersaUV LEF2-300
277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
Determining the Maximum Value (Threshold) for Automac Height Adjustment
You can set the maximum value (the threshold) to use when automacally adjusng the height of the table during
prinng.
This seng is only enabled when "CLEARANCE MODE" is set to "RE-ADJ".
Procedure
1. Press [MENU].
2. Press [] several mes to display the screen shown below.
MENU
SUB MENU
3. Press [].
4. Press [] several mes to display the screen shown below.
SUB MENU
CLEARANCE MODE
5. Press [], then [] to display the screen shown below.
CLEARANCE MODE
THRESHOLD
6. Press [].
7. Press [] or [] to select the threshold.
THRESHOLD
Explanaon
0.1 mm to 10.0 mm
(default seng: 10.0 mm)
The maximum value (the threshold) to use when automacally adjusng the height of the
table during prinng.
8. Press [ENTER] to conrm your entry.
9. Press [MENU], then [] to go back to the original screen.
MEMO
The greater the distance between the print surface and the print head, the greater the trend for the prinng image quality to
drop. Therefore, it is benecial to minimize the adjustment width. Keep the following points in mind when determining the
seng value.
Consider the eect on the prinng image quality in order to obtain sasfactory image quality.
The variaon in height across the enre print surface (not the print target area but including parts that will not be printed)
Adjusting the Height
1. Optimizing the Setup Method 77

Table of Contents

Other manuals for Roland VersaUV LEF2-300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland VersaUV LEF2-300 and is the answer not in the manual?

Roland VersaUV LEF2-300 Specifications

General IconGeneral
Printing TechnologyPiezo inkjet
Ink ConfigurationCMYK + White + Clear
Ink ColorsCyan, Magenta, Yellow, Black, White, Clear
ConnectivityUSB 2.0, Ethernet
Maximum Print Width780 mm
Maximum Media Width800 mm
Print Resolution1440 x 1440 dpi
Media ThicknessUp to 200 mm
Maximum Media Thickness50 mm
Ink TypeUV Ink
Ink Droplet SizeVariable dot
Power Supply100-240V AC, 50/60Hz
Power Requirements100-240V AC, 50/60Hz
Power Consumption600W
Dimensions1, 318 (W) x 983 (D) x 705 (H) mm 51.9 (W) x 38.7 (D) x 27.8 (H) in.
Dimensions (W x D x H)1190 x 940 x 290 mm
Weight128 kg

Related product manuals