Rosco RB48 - Safety Alert Symbols and Signal Words

Safety
ROSCO - A LeeBoy Company
RB48 BROOM
2.2
This Safety Alert symbol means
ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
The Safety Alert symbol identifies
important safety messages on the
ROSCO Broom and in this manual.
When you see this symbol, be alert
to the possibility of personal injury or
death. Follow the instructions in the
safety message.
Why is SAFETY important to you?
3 Big Reasons: *Accidents Disable and Kill
*Accidents Cost
*Accidents Can be Avoided
Signal Words
Note the use of the signal words DANGER,
WARNING and CAUTION with the safety
message. The appropriate signal word for each
message has been selected using the
following guidelines:
DANGER An immediate and specific
hazard which WILL result in
severe personal injury or death
if the proper precautions are
not taken.
WARNING A specific hazard or unsafe
practice which COULD result in
severe personal injury or death
if proper precautions are not
taken.
CAUTION Unsafe practices which COULD
result in personal injury if proper
practices are not taken, or as a
reminder of good safety
practices.
Equipment Safety Symbol
Throughout this manual, whenever you see this "Broken Bolt" symbol, it means:
ATTENTION Equipment on the machine could be damaged through
improper performance of an operation, maintenance or
repair procedure.
SAFETY ALERT SYMBOLS