Rosco RB48 - Front Fender GRP

ROSCO - A LeeBoy Company 6. 83 Parts Book
REF.
REV.
RB48 BROOM
ITEM PART NO. QTY DESCRIPTION
18058
A
OTHER OPTIONAL EQUIPMENT - FRONT FENDER GRP
18058 FRONT FENDER GROUP
1 .............. 16909............ REF............... FRONT AXLE ASSY
2 .............. 18075............ 2.00 ............... FENDER,REWORK
3 .............. 18076............ 2.00 ............... TAPPED PAD
4 .............. 18080............ 1.00 ............... SUPPORT W/M,RH FENDER
5 .............. 18082............ 1.00 ............... SUPPORT W/M,LH FENDER
6 .............. 20015............ 4.00 ............... SUPPORT,FENDER
7 .............. 80140............ 24.00 ............. WASHER,TYPE A PLAIN,.250
8 .............. 80162............ 4.00 ............... WASHER,SPLIT LOCK,.375
9 .............. 80208............ 12.00 ............. CSHH,.312-18X1.00,GR5
10 ............ 80219 ............ 4.00 ............... CSHH,.375-16X.75,GR5
11 ............ 80351 ............ 12.00 ............. NUT,FLEXLOC,.312-18,FULL,LT
NOTES:
1. REMOVE 1.25" OF
GUSSET LOCATED ON THE
FRONT OF THE LEFT
FRONT WHEEL KING PIN W/
M.
2. GRIND KING PIN W/M
FLUSH BEFORE WELDING
ITEM 3.
3. TAPPED PAD MUST BE
WELDED TO FRONT AXLE
ASSEMBLY PRIOR TO
PAINTING.