Rosslare AC-825IP - Mounting Using the DIN Rail; Figure 6: DIN Rail; Figure 7: Unlocking the DIN Rail Handle

AC-825IP Panel Setup
AC-825IP Hardware Installation and User Guide 17
3.1.3 Mounting using the DIN Rail
The AC-825IP control panel and its extensions can also be installed directly on
a wall (without the ME-1515 enclosure) using a DIN rail and the accompanying
casing for the AC-825IP panel or extension(s).
To mount using a DIN rail:
1. Attach the DIN rail to a wall in the designated area.
Figure 6: DIN Rail
2. Once the AC-825IP panel or extension is positioned inside the casing, pull
the ‘UNLOCK’ handle on the left side of the casing to the left (Figure 7).
Figure 7: Unlocking the DIN Rail Handle