Rosslare AC-825IP - Figure 8: Positioning the Panels; Figure 9: Adding a Screw as a Stopper

AC-825IP Panel Setup
18 AC-825IP Hardware Installation and User Guide
3. Position the panels and/or extensions on the DIN rail with its title facing
you.
Figure 8: Positioning the Panels
4. Release the handle. The unit is secured horizontally on the DIN rail.
5. Add a kind of stopper or screw underneath each unit so the unit does not
slide down the DIN rail.
Figure 9: Adding a Screw as a Stopper
If you have multiple units along a DIN rail, we suggest having a 2-cm gap
between each unit.