Rosslare AC-825IP User Manual

Introduction
10 AC-825IP Hardware Installation and User Guide
1.2.2 Configurable Links
The system's configurable links model makes it possible to trigger any chosen
output automatically or report a configurable alarm, based on a selected input.
This allows easy integration with other access systems such as intruder alarms,
CCTV systems, and License Plate Recognition (LPR).
Integration with other access systems was not evaluated by UL.
AxTraxNG can also define a selected set of operations, which are defined in
configurable links, when a panel registers a specified user or a group of users.
This can be useful, for example, in access control systems. The system can
assign users with counters, allowing a limited number of entries to each panel.
1.3 Compatible Readers
The AC-825IP ACU provides support for most of the Wiegand formats, such as
26-bit, 30-bit, 32-bit, 35-bit, and 36-bit, as well as any OSDP readers that may
be connected serially to the AC-825IP via RS-485 interface.
Supports UL Listed Rosslare readers. UL Listed OSDP readers should be used
with the OSDP port of the AC-825IP.

Rosslare AC-825IP Specifications

General

Brand	Rosslare
Model	AC-825IP
Category	Controller
Language	English