Programming the AC-Q74
AC-Q74 Installation and Programming Manual 23
11. Programming the AC-Q74
Programming the AC-Q74 is done solely via the unit's keypad driven
Programming Menu System. To reach the Programming Menu System
the AC-Q74 must first be placed into Programming mode (see Section
11.1).
During the AC-Q74's manufacturing process certain codes and
settings are pre-programmed. These settings are the called the
Default Factory Settings.
Table 2 shows the names of all the AC-Q74 menus. It also shows of
all the AC-Q74’s default factory codes and settings.
Table 2: Programming Menus
Factory
Settings
Menu Description Menu
Number
2580 Changing Lock Strike Code 1 1
0852 Changing Lock Strike Code 2 2
1234 Changing Program Code 3
3838 Changing Normal/Secure Code 4
N/A Changing Normal/Bypass Code 5
0004 Changing Door Release Time 6
Enrolling Proximity Cards, PIN Code or
both
7
Deleting Proximity Cards or PIN Code 8
Return to Default Factory Setting 0
You will find a complete description and instructions for each of the
above menu items on the following pages.
To Next Page
Loading...
Need help?
General
