Rosslare AC-Q74 - Enrolling Secondary Codes Using the Code Search Method

Programming the AC-Q74
32 AC-Q74 Installation and Programming Manual
11.9.5 Enrolling Secondary Codes using the Code
Search Method
The Code Search feature enables you to quickly enroll a Secondary
code to a user who already has a Primary code.
1. Enter Programming Mode.
2. Press “7” to enter Menu 7.
The Door LED turns orange.
3. Enter the 3-digit User Slot number 000.
The Door LED flashes orange.
The
controller is now waiting for the Primary code of the user you
want to add a Secondary code to
4. Present the Proximity Card or enter the 4-digit PIN code of the
Primary code belonging to the user you want to add a Secondary
code to.
The Mode LED flashes red.
If the Primary code entered is not valid, you hear a long beep and
the AC-Q74 continues to wait for a valid Primary code.
5. Present the Proximity Card or enter the 4-digit PIN code to be
used as the Secondary code.
 If the Secondary code is valid the controller beeps three times
and returns to Normal mode.
 If the Secondary code is invalid, the controller sounds a long
beep and the AC-
Q74 continues to wait for a valid Secondary
code to be entered.
Mode Door
GREEN
Mode Door
ORANGE
0
0
0
Mode Door
ORANGE
Mode Door
RED
ORANGE