Rosslare AC-Q74 User Manual

Programming the AC-Q74
30 AC-Q74 Installation and Programming Manual
11.9 Enrolling Primary & Secondary Codes
11.9.1 Primary Codes
 Primary codes can only be enrolled to an empty User Slot – a slot
where there is no existing Primary code.
 Primary codes must be unique – one user’s Primary code may not
be the same as another user’s Primary code.
 Primary codes cannot be the same as any system codes, such as
the Normal/Secure code or Lock Strike code.
 Users who hold a Primary code can gain entry only during Normal
mode.
11.9.2 Secondary Codes
 Secondary codes can only be enrolled to a User Slot that already
has a Primary code enrolled but no Secondary code.
 Secondary codes do not have to be unique – multiple users can
all hold the same Secondary code.
 Secondary codes cannot be the same as any system codes, such
as the Normal/Secure code or Lock Strike codes.
 Users who hold Secondary codes can gain entry in any Mode of
Operation.
11.9.3 Enrolling Primary and Secondary Codes
There are two methods to enroll Primary and Secondary codes, the
Standard Method and the Code Search Method.
 The Standard Method is mainly used when the User Slot number
for the user you wish to program is known. You can program
both Primary and Secondary codes using the Standard method
(see Section 11.9.4).
 The Code Search Method is mainly used when enrolling a user’s
Secondary code and the User Slot code is unknown. The Search
method only works if a user’s Primary code is already enrolled but
the Secondary code is not (see Section 11.9.5).

Rosslare AC-Q74 Specifications

General

Brand	Rosslare
Model	AC-Q74
Category	Card Reader
Language	English