Programming the AC-Q74
26 AC-Q74 Installation and Programming Manual
11.4 Changing Lock Strike Code 2
The Lock Strike Code 2 is mainly used as a method to quickly test the
Lock Strike Relay during installation.
The default factory setting for the Lock Strike Code 2 is 0852. When
the first user is added to the controller, the default Lock Strike Code 2
is automatically be deleted and the system is ready for a new Lock
Strike Code 2 to be re-entered.
To change Lock Strike Code 2:
1. Enter Programming mode.
2. Press “2” to enter Menu 2.
The Mode LED turns orange.
3. Enter the new 4-digit code you wish to set
as Lock Strike Code 2.
The system returns to Normal mode.
You hear three beeps.
The Door LED turns off.
The Mode LED turns green.
• Lock Strike Code 2 does not work in Secure Mode.
• Wrong entries return the controller to Normal Mode.
• Code 0000 erases the Lock Strike Code 2.
11.5 Changing the Programming Code
To change the Programming code:
1. Enter Programming mode.
2. Press “3” to enter Menu 3.
The Mode LED turns green.
3. Enter the new 4-digit Programming code.
To Next Page
Loading...
Need help?
General
