The risk of slipping can be caused by oil or dirt on the floor near
the lift.
Keep the area under and around the lift clean. Remove all oil spills.
Avoid use of water, steam, solvent, varnish jets in the lift area where electric cables are placed and, in
particular, next to the electric panel.
6.9 RISKS RESULTING FROM IMPROPER LIGHTING
Make sure all areas next to the lift are well and uniformly lit, according to local regulations.
6.10 RISKS OF BREAKING COMPONENTS DURING OPERATION
Materials and procedures, suitable for the designed parameters of the lift,
have been used by the manufacturer to build a safe and reliable product.
Operate the lift only for the use it has been designed for and follow the
maintenance schedule shown in the chapter “Maintenance”.
6.11 RISKS FOR UNAUTHORISED USES
The presence of unauthorized persons next to the lift and on the platforms
is strictly forbidden during lifting as well as when the vehicle has been
already lifted
ANY USE OF THE LIFT OTHER THAN HEREIN SPECIFIED CAN CAUSE SERIOUS ACCIDENTS
TO PEOPLE IN CLOSE PROXIMITY TO THE LIFT
To Next Page
Loading...
