GB
Page 50 of 57
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Fig. 51
GAR305
Fig. 52
GAR307
Press button .
On the monitor the next screen page will be displayed:
Move the tip of the width measuring device (Fig. 53
ref. 1) in line with the outer surface of the flange
(Fig. 53 ref. 2).
1
2
1
2
Fig. 53
GAR307
GAR305
Press button . At the end of the operation, the
following screen will appear on the monitor:
The calibration of the external data gauge is finished.
1297-M008-8
To Next Page
Loading...