Rotax RM1 - Page 111

Operator`s Manual RM1
Seite/page 111/132 ROTAX KART RM1 Ausgabe/Edition 01/2006
NOTES
KART PART 1
BEFORE EVERY OPERATION AFTER EVERY OPERATION EVERY 2 HOURS OF OPERATION EVERY 5 HOURS OF OPERATION EVERY 10 HOURS OF OPERATION EVERY 50 HOURS OF OPERATION
Check brake circuit for non-leakage
X
Check level of brake-fluid in expansion
chambers refill as required
X
Use only brake fluid of DOT 4
qualit
y
Check functions of brake s
y
stem
X
X
Check brake pads for wear, renew as
required
X
min. layer thickness:
1,5 mm / 0,06 in
Renew brake fluid
X
Renew yearly
Use only brake fluid of DOT 4
quality
Check hydraulic hoses of brake system
for damages and non-leakage
X
Check brake caliper supports for
dama
g
e
X
Verify a tight fit of all brake-system
fixation elements and retorque as
required
X
Check steerin
g
for eas
y
movabilit
y
X right after every collision
Check steerin
g
for dama
g
es
X right after every collision
Check steerin
g
rods for dama
g
es
X
Verify a tight fit of all steering wheel
fixation elements and retorque as
required
X
Check tire pressure
X
Check tires for dama
g
es and wear
X right after every collision
Check fixation of rims and hubs,
retorque as requested
X
Check tire safety screws for tight fit,
retorque as requiredd
X
Check throttle Bowden cable for easy
movabilit
y
, appl
y
oil as requested
X
Check shifting Bowden cables for
possible contact with hot parts
(exhaust..)
X
Check shift paddle for easy movability
X
FREQUENCY