EasyManua.ls Logo

Rotax RM1 - Page 112

Rotax RM1
132 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operator`s Manual RM1
Seite/page 112/132 ROTAX KART RM1 Ausgabe/Edition 01/2006
NOTES
KART PART 2
BEFORE EVERY
OPERATION
AFTER EVERY
OPERATION
EVERY 2 HOURS OF
OPERATION
EVERY 5 HOURS OF
OPERATION
EVERY 10 HOURS
OF OPERATION
EVERY 50 HOURS
OF OPERATION
Check tire protection rollers for easy
movabilit, apply oil as requested
X
Check RFS support on frame for
damages
X
right after every collision
Check setup of tire protection rollers
after every adjustment of track
width
Check electric connection so tight fit
( also the ones under the battery cover)
X
Charge battery
as required, as often as
possible
Check battery support
X
Check upper seat mounting screws for
tight fit, retorque as requred
X
Checkbottomr seat mounting screws for
tight fit, retorque as required
X
Check brake and throttle pedal if moving
freely
X
Check gap between brake pedal and
stop, adjust as required
X
Renew left side rear axle bearing
X
FREQUENCY

Table of Contents