Roth Softline – Controller 8 ch Master - 4. FLOOR HEATING; Floor Sensor Registration; Floor Sensor Information

User Manual - 12/32
4. FLOOR HEATING
4.1 REGISTRATION
You can connect a cable oor sensor directly to the Soline Standard room thermostat.
In connection with the Soline Project room thermostat you can also connect a seperate wireless Soline Project oor sensor to a zone if needed.
Choose “oor heating” using ▼ – pres MENU. Choose “registration” – pres MENU. Choose YES to register sensor and searching will start. Pres
registration button briey twice, on the back (see pictures below) of the oor sensor and the sensor will be found. Choose OK with MENU to leave
setup.
4.2 INFORMATION
Here you can see the setting and status of the oor sensor.
3
Operation
mode
Local
schedule
Select Preview Edit
Global
schedule
G1 - G5
Select Preview Edit
Constant
temperature
With time
limitation
User
settings
Floor pump
On Off
Heating
On
Schedule
settings
Constant
temperature
Temperature
settings
Temp.
comfortable
Economical Holidays
Zones
1-8
Floor
heating
Registration Information
Operation
mode
Off
Floor
protection
Comfort
Max
temperature
Hysteresis Calibration
Roth Soline Standard room thermostat Roth Soline Project oor sensor
x 2