ROTOTILT ICS - Advanced Operational Functions; Pulsating function; Non-variable hydraulic flow, Extra 2

© Rototilt Group AB 2018-04-05
2
Right
Left
B
1
2
D
EN
English
Pulsating function
The ICS control system can produce a
pulsating, shaking function to spread
material out of a tilting bucket, for
example.
Press switch 1 and regulate the speed
with roller B.
Non-variable hydraulic flow, Extra 2
The ow can be locked using switch 2
(Hold) when the intended level is reached
with roller D (Extra2). Press and hold the
switch for 0.5 seconds.
The next time the switch (2) is pressed
the function releases and the ow
ceases.
!
IMPORTANT -
Carefully check the relevant functions, on the display or
the handle sticker.
2200230_ _7225