Page 37 of 52
10 RTX745x feature description
This section aims to introduce you to the available features on the RTX745x base. Some of the features will
be briefly described through the sections below, whereas the main highlights will be presented via a table
with function descriptions (please refer to 12. Appendix B for more details)
10.1 Soft client support
As previously mentioned, the base has support for various soft clients (refer to 3.1 Soft client support)
10.2 EHS interface
The RTX745x supports EHS phones. The base is prepared to be compatible with various EHS standards. This
is done by having a slider switch that enables 6 separate HW configurations for the audio routing. The PC
Setup tool is used to configure the optimal settings for the SW configuration. (Please refer to 15. Appendix C
EHS and DHSG API for details.)
The RTX725x supports 2 active calls, meaning that the 3
rd
incoming call will be rejected or ignored. If during
a call the user receives an incoming call, the call can be rejected by double pressing the Multi-Function key
or accepted by long pressing the same key. The long press will answer the incoming call and put on hold the
current one.
10.3 Ringer configuration
The RTX745x has a built-in ringer for audible alerts for the user. The audio settings of the ringer can be
configured via the PC Setup tool or the base menu. The ringer may be muted by selecting “Silent mode” in
the PC Setup Tool.
To Next Page
Loading...
