Ruby Tech GS-2224L User Manual

Ruby Tech GS-2224L Specifications

General

Brand	Ruby Tech
Model	GS-2224L
Category	Switch
Language	English

Summary

1. Introduction

1-3. Features

Details the hardware and management features of the GS-2224L switch.

2. Installation

2-1-4. Configuring the Management Agent of GS-2224L

Explains how to configure the switch's management interface via RS-232 or Ethernet.

2-1-5. IP Address Assignment

Explains IP address structure, classes, subnet masks, and private IP address blocks.

3. Operation of Web-based Management

3-1-4. IP Configuration

Guides on configuring the switch's IP address, subnet mask, default gateway, and DNS.

3-3. VLAN

Explains VLAN concepts and configuration, supporting Tag-based and Port-based VLANs.

3-8. ACL

Explains Access Control Lists (ACLs) for packet filtering based on various parameters.

3-10. 802.1X Configuration

Explains 802.1X port-based network access control for user authentication.

3-12. STP Configuration

Details Spanning Tree Protocol (STP) configuration for avoiding network loops.

3-20. Diagnostics

Covers device self-diagnostics, including diagnostics, loopback, and ping tests.

4. Operation of CLI Management

4-1-1. Login

Details the process of logging into the switch via the command-line interface (CLI).

4-2. Commands of CLI

Lists and categorizes available CLI commands, including global and local commands.

5. Maintenance

5-1. Resolving No Link Condition

Lists possible causes for a "no link" LED status on switch ports.

Appendix A Technical Specifications

Appendix B Null Modem Cable Specifications