Ruby Tech GS-2224L - Page 230

220
 gvrp
set state
Syntax:
set state < 0 | 1>
Description:
To disable/ enable the gvrp function.
Argument:
0 : disable the gvrp function
1 : enable the gvrp function
Possible value:
0 : disable the gvrp function
1 : enable the gvrp function
Example:
GS-2224L(gvrp)# set state 1
group applicant
Syntax:
group applicant <vid> <port> < 0 | 1>
Description:
To enter any of gvrp group for changing gvrp group setting. You can change the
applicant or registrar mode of existing gvrp group per port.
Argument:
<vid>: enter which gvrp group you had created, using value is vid. Available range:
1 to 4094
<port>: 1 to 24
< 0 | 1> :
Possible value:
<vid>: 1~4094
<port>: 1 to 24
Example:
GS-2224L(gvrp)# group applicant 2 5 0
GVRP group information
Current Dynamic Group Number: 1
VID Member Port
---- --------------------------------------------------
2 5