Ruby Tech GS-2224L - Page 231

221
set applicant
Syntax:
set applicant <port> < 0 | 1 >
Description:
To set default applicant mode for each port.
Argument:
<port>: port range, syntax 1,5-7, available from 1 to 24
<0>: set applicant as normal mode
<1>: set applicant as non-participant mode
Possible value:
<port>: 1 to 24
< 0 | 1 >: normal or non-participant
Example:
GS-2224L(gvrp)# set applicant 1-10 non-participant
set registrar
Syntax:
set registrar <port> < 0 | 1 | 2>
Description:
To set default registrar mode for each port.
Argument:
<port>: port range, syntax 1,5-7, available from 1 to 24
<0>: set registrar as normal mode
<1>: set registrar as fixed mode
<2>: set registrar as forbidden mode
Possible value:
<range>: 1 to 24
< 0 | 1 | 2>: normal or fixed or forbidden
Example:
GS-2224L(gvrp)# set registrar 1-5 fixed
set restricted
Syntax:
set restricted <port> <0 | 1 | 2>
Description:
To set the restricted mode for each port.
Argument:
<port>: port range, syntax 1,5-7, available from 1 to 24
<0>: set restricted normal
<1>: set restricted fixed
<2>: set restricted forbidden
Possible value:
<port>: 1 to 24
< 0| 1| 2>: normal, fixed or forbidden
Example:
GS-2224L(gvrp)# set restricted 1-10 1
GS-2224L(gvrp)# show config
GVRP state: Enable