Ruby Tech GS-2224L User Manual

222
Port Join Time Leave Time LeaveAll Time Applicant Registrar Restricted
---- --------- ---------- ------------- --------------- --------- ----------
1 20 60 1000 Normal Normal Enable
2 20 60 1000 Normal Normal Enable
3 20 60 1000 Normal Normal Enable
4 20 60 1000 Normal Normal Enable
5 20 60 1000 Normal Normal Enable
6 20 60 1000 Normal Normal Enable
7 20 60 1000 Normal Normal Enable
8 20 60 1000 Normal Normal Enable
9 20 60 1000 Normal Normal Enable
10 20 60 1000 Normal Normal Enable
:
:
:
22 20 60 1000 Normal Normal Disable
23 20 60 1000 Normal Normal Disable
24 20 60 1000 Normal Normal Disable
set timer
Syntax:
set timer <port> <JoinTime> <leaveTime> <leaveAllTime>
Description:
To set gvrp join time, leave time, and leaveall time for each port.
Argument:
<port> : port range, syntax 1,5-7, available from 1 to 24
<JoinTime>: join timer, available from 20 to 100
<LeaveTime>: leave timer, available from 60 to 300
<LeaveAllTime>: leaveall timer, available from 1000 to 5000
Leave Time must equal double Join Time at least.
Possible value:
<port> : 1 to 24
<JoinTime>: 20 to 100
<LeaveTime>: 60 to 300
<LeaveAllTime>: 1000 to 5000
Example:
GS-2224L(gvrp)# set timer 2-8 25 80 2000
show
Syntax:
show
Description:
To display the gvrp configuration.
Argument:
None
Possible value:
None
Example:
GS-2224L(gvrp)# show
GVRP state: Enable
Port Join Time Leave Time LeaveAll Time Applicant Registrar Restricted

Ruby Tech GS-2224L Specifications

General

Brand	Ruby Tech
Model	GS-2224L
Category	Switch
Language	English

Summary

1. Introduction

1-3. Features

Details the hardware and management features of the GS-2224L switch.

2. Installation

2-1-4. Configuring the Management Agent of GS-2224L

Explains how to configure the switch's management interface via RS-232 or Ethernet.

2-1-5. IP Address Assignment

Explains IP address structure, classes, subnet masks, and private IP address blocks.

3. Operation of Web-based Management

3-1-4. IP Configuration

Guides on configuring the switch's IP address, subnet mask, default gateway, and DNS.

3-3. VLAN

Explains VLAN concepts and configuration, supporting Tag-based and Port-based VLANs.

3-8. ACL

Explains Access Control Lists (ACLs) for packet filtering based on various parameters.

3-10. 802.1X Configuration

Explains 802.1X port-based network access control for user authentication.

3-12. STP Configuration

Details Spanning Tree Protocol (STP) configuration for avoiding network loops.

3-20. Diagnostics

Covers device self-diagnostics, including diagnostics, loopback, and ping tests.

4. Operation of CLI Management

4-1-1. Login

Details the process of logging into the switch via the command-line interface (CLI).

4-2. Commands of CLI

Lists and categorizes available CLI commands, including global and local commands.

5. Maintenance

5-1. Resolving No Link Condition

Lists possible causes for a "no link" LED status on switch ports.

Appendix A Technical Specifications

Appendix B Null Modem Cable Specifications