Web-based Configuration Guide Fast Internet Access
10
Caution
No Ethernet cable is required in the wireless repeater mode. The wireless network stability can be affected by
many factors. Therefore, the wired connection is recommended.
3. Wireless Connection by Web configuration
Connect the router to a power supply and log in the Web configuration page, for details, you can see 1.1
Connecting to the Router and 1.2 Logging in.
click Start Setup without connecting an Ethernet cable.
Wireless Repeater
(1) Select Wireless Repeater.
Wireless repeater mode: Click Wireless Repeater, and the SSID of the primary router, and enter the Wi-Fi
password to connect to the primary router.
○ In wireless repeater mode, only Wi-Fi signals are extended and the DHCP function is disabled. The IP
addresses of all clients connected to the primary and secondary routers are assigned by the primary
router. If the device connects to the primary router in wireless repeater mode, the WAN port of the device
keeps unchanged. If WAN cable is plugged in, the device automatically switches to the wired repeater
mode.
To Next Page
Loading...
