Chapter
2 Names
and
Functions
5)
I
Press
with
Semiautomatic Plate
Changer
I Safety cover section
A.
Plate tail edge stopper
For using polyester plate, the plate tail edge is put
on this when mounting so that the plate
is
properly
tensioned.
This
increases
the
plate
mounting
accuracy.
Introduction Edition - 38
[Second unit]
B.
Side plate
For using polyester plate, the side position
can
be
adjusted using this after inserting the plate into the
leading edge clamp so that it is mounted correctly.
To Next Page
Loading...
