Operation Procedures
The basic printing procedures when printing on paper with a size
of
310 x 440
mm
(12.20 x 17 .32") and a thickness
of
0.1
mm
(0.004") will
be
explained.
1.
Plate Making
If
the image position is incorrect, more time and work will
be
required for the vertical and
diagonal image adjustment before printing. Reproduce the image accurately to assure efficient
registration operation.
485mm
(19.09")
I·
(Leading edge)
T22
mm (0.87")
,....-------------,-
- · j
~
Printing start line
Max. printing area
330x438
mm
(12.99 X 17.24")
335
mm
---~
..
~~
(13.19")
Before doing the punch processing, first match the
graduation
of
the RP22 register punch scale ( 1) with
the
I>late
width. Then set the plate
on
the RP22 and
punch the holes.
(Reference)
For
higher efficiency and more accurate punch processing, we recommend using
the RP520-220F register punch.
Operation Edition - 1
To Next Page
Loading...
