S-TEC Fifty Five X - Back Course Approach with Procedure Turn

3-20 3rd Ed. Sep 30, 06
S–TEC
1. a. Select LOC frequency.
b.
Heading System HSI
Set Course Pointer to FRONT INBOUND LOC course.
Heading System DG
Set Heading Bug to FRONT INBOUND LOC course.
c. Press NAV mode selector switch to engage navigation approach mode.
d. Intercept and track BACK OUTBOUND LOC course.
2. a. At appropriate time, set Heading Bug to BACK OUTBOUND PROCEDURE
TURN heading.
b. Press HDG mode selector switch to engage heading mode.
3. a. Turn Heading Bug in two successive 90° increments, to establish aircraft
on BACK INBOUND PROCEDURE TURN heading.
b.
Heading System HSI
Course Pointer remains unchanged.
Heading System DG
Set Heading Bug to BACK INBOUND LOC course.
c. Press REV mode selector switch to engage reverse approach mode.
d. Intercept and track BACK INBOUND LOC course.
Fig. 3-26. Back Course Approach with Procedure Turn
265°
N
085°
310°
130°
1.
2.
Back Course