S-TEC Fifty Five X - VOR Approach with Procedure Turn

3-30 3rd Ed. Sep 30, 06
S–TEC
Fig. 3-36. VOR Approach with Procedure Turn
1. a. Select VOR frequency.
b.
Heading System HSI
Set Course Pointer to FRONT INBOUND VOR course.
Heading System DG
Set Heading Bug and OBS to BACK INBOUND VOR course.
c. Press REV mode selector switch to engage reverse mode.
d. Intercept and track FRONT OUTBOUND VOR course.
2. a. At appropriate time, set Heading Bug to FRONT OUTBOUND PROCEDURE
TURN heading.
b. Press HDG mode selector switch to engage heading mode.
3. a. Turn Heading Bug in two successive 90° increments, to establish aircraft
on FRONT INBOUND PROCEDURE TURN heading.
4. a.
Heading System HSI
Course Pointer remains unchanged.
Heading System DG
Set Heading Bug and OBS to FRONT INBOUND VOR course.
b. Press APR mode selector switch to engage navigation approach mode.
c. Intercept and track FRONT INBOUND VOR course.
d. At middle marker, if missed approach is declared, disconnect autopilot.
e. Stabilize aircraft.
f. Set Heading Bug to missed approach heading.
g. Press HDG mode selector switch to engage heading mode.
N
3
.
4
.
310°
130°