9. DISASSEMBLY ROYAL
Seite 16/20 REV.4 SEPT.2003 Saeco International Group
e) Replace parts as necessary.
f) When replacing the gear wheel ensure that the arrow on the large gear wheel
points towards the achsle of the small gear wheel. The brewing unit cannot be
installed in this position. (Install all components, switch on machine - gears go
to home position - install brewing unit.) The small gear wheel can be
assembled as required
a) Micro switch brew position
b) Micro switch home position
c) Micro switch dreg drawer
d) Micro switch brew unit
Abb. 27
1
To Next Page
Loading...
