EasyManua.ls Logo

Saeco Classic - Technical Data (Royal Digital Plus; Professional Rapid Steam; Prof. Redesign; Coffeebar)

Saeco Classic
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. TECHNICAL DATA ROYAL
Page 4/5 REV.4 SEPT.2003 Saeco International Group
4. Technical data (Royal Digital Plus / Professional Rapid Steam / Prof. Redesign / Coffeebar)
Royal Digital Plus / Professional Rapid Steam / Prof. Redesign / Coffeebar
Technical data
Power supply/output:
230V 50Hz 1600W
Safety system:
170°C Safety thermostat for instantaneous water heater
Temperature monitoring:
KTY Temperature sensors transmit respective
temperatures to electronic system
Continuous flow thermoblock:
Instantaneous water heater - 1090 W - supplementary
heating 437 W for coffee and hot water dispensing
Pipe heating:
1000W – Steam dispensing (rapid steam)
Pump:
Ulka reciprocating piston pump with angle connector
and thermostat - 48 W, 230V, 50 Hz.
Type EX5, 20 l/h
Safety valve:
Conventional safety valve connected to pump
Water filter:
Installed in machine in front of the turbine and pump.
Gearmotor:
Direct current, 30 - 35 V
Cup heater/Gear resistor:
Approx. 437W / 130
Grinder (conical grinder):
Motor:
Plastic grinding screw, galvanised steel grinding cone
and grinding disc
260 V Direct current
Second doser:
Coffee dose adjustable by means of lever (6 - 9g) outside
housing
230 V - Magnet coil
Second doser:
Doser for powder coffee, by means of measuring spoon
Power consumption:
During heating - approx. 5.7 A
Standby - Approx. 0.04 A
Pump pressure:
Max. 15 bar
Dimensions W x D x H in mm:
385/450/395 (Royal Profi new)
385/480/395 (Royal Coffeebar)
Weight:
Approx. 16 kg
Capacity of coffee bean container:
Approx. 300g
Capacity of water tank:
Approx. 2.4 l max.
Fixed water connection:
(only for Royal Coffeebar)
Inlet valve / non-return valve
Pressure control - 0.8 bar
Instantaneous water heater capacity:
Approx. 1.0 ccm, 10 ml volume
De-aeration time:
Approx. 1 - 2 sec. for initial star-up
Heating time:
Approx. 90 sec. with water at 10°C
Re-heating time:
None due to boiler
Steam heating time:
None, due to pipe heating
Coffee dispensing temperature:
Approx. 86° C
Grinding time:
Initial grinding with completely empty machine:
Approx. 15 sec. / subsequent grinding: approx. 5.5 sec.
Time to make expresso:
Approx. 28 sec. for 50 ml
Time to make cup of coffee:
Approx. 40 sec. for 100 ml

Table of Contents

Related product manuals