Saeco TALEA - Solenoid Valve; Multi-Way Valve

Page 6 / 13 Saeco International Group
07 DISASSEMBLY TALEA / ODEA - LINE
To disassemble the solenoid valve /
multi-way valve
7.7. Solenoid valve / multi-way valve
1
2
Fig. 1
• Remove the screws shown.
• Loosen the coffee dispenser bracket.
Fig. 2 / 3
• Loosen the boiler pin.
• Loosen the boiler’s bracket (see section
7.6 / Fig. 1 and 2).
Fig. 4
1. Remove the screw shown.
Fig. 5
• Unhinge the pressure-relief hose.
32
4
Fig. 6
• Remove the valve unit.
5
7
6
Fig. 7
• When putting together the 2nd control
valve, make sure the graded side is
pushed in fi rst.