DOCUMENT SSE-0000077399-01 - VERSION 1.0 - MAY 2010 23
S
AGEM SÉCURITÉ DOCUMENT - REPRODUCTION AND DISCLOSURE PROHIBITED
MORPHOACCESS® J SERIES – User Guide Configuring a networked MorphoAccess®
TERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATIONTERMINAL CONFIGURATION
See Wi-Fi™ parameters description in paragraph Wi-Fi™ configuration.
NOTE A MorphoAccess
®
Wi-Fi™ Licence is mandatory.
If the terminal is configured to use the Wi-Fi™ connection
with the Wi-Fi™ USB adapter plugged in and if there is no
licence present, the MorphoAccess
®
will display a error signal.
To solve this issue, unplug the Wi-Fi™ USB adapter and
restart the terminal. To restart the terminal use the reset button
located in front face of the terminal (see section 2, chapter 1.
Interfaces presentation, sub-paragraph “Power supply
interface” for more information on reset button).
To Next Page
Loading...
