EasyManua.ls Logo

SAJ H2 - Page 10

SAJ H2
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H2 series
5
DANGER
Risk of fatal personnel injuries due to electrical shock and high voltage.
Do not touch the operating component of the inverter; it might result in burning or death.
To prevent risk of electric shock during installation and maintenance, please make sure that all
AC and DC terminals are disconnected prior to work.
Do not touch the surface of the inverter while the housing is wet, otherwise, it might cause
electrical shock.
Do not stay close to the inverter while there are severe weather conditions including storm,
lightning, etc.
Before opening the housing, the SAJ inverter must be disconnected from the grid and PV
generator; you must wait for at least five minutes to let the energy storage capacitors
completely discharge after disconnecting from power source.
Please keep the power off prior to any operations.
WARNING
Any unauthorized actions including modification of product functionality of any form may
cause lethal hazard to the operator, third parties, the units or their property. SAJ is not
responsible for the loss and these warranty claims.
Do not touch non-insulated parts or cables.
For personal and property safety, do not short-circuit the positive (+) and negative (-)
electrode terminals.
Disconnect the PV array from the inverter by using an external disconnection device. If no
external disconnection device is available, wait until no more DC power is applied to the
inverter.
Disconnect the AC circuit breaker, or keep it disconnect if it is tripped, and secure it against
reconnection.
The SAJ inverter must only be operated with the PV generator. Do not connect any other
source of energy to the SAJ inverter.
Be sure that the PV generator and inverter are well grounded in order to protect properties
and persons.
CAUTION
·The inverter will become hot during operation. Please do not touch the heat sink or peripheral
surface during or shortly after operation.
·Risk of damage due to improper modifications.
NOTICE
Moving or reinstall the inverter to another location might void the warranty without prior written
permission from SAJ.

Table of Contents

Related product manuals