SAJ H2 - About this Document; Overview; Target Audience; Safety

H2 series
2
1.1. About this document
1.1.1. Overview
This User Manual provides introductions and instructions of installing, operating, maintaining, and
troubleshooting of the SAJ products H2-(5K-7.6K)-LS3-US and H2-(9.6K-11.4K)-LS4-US. For details,
refer to the model types listed in section 2.2 "Models".
Read the user manual carefully before any installation, operation and maintenance and follow the
instructions during installation and operation. Keep this manual all time available in case of emergency.
Failure to follow any of the instructions or warnings in this document can result in device damage,
potentially rendering it inoperable; or even causes electrical shock, serious injury, or death. SAJ shall take
no responsibility for any personal injuries or property damage caused by improper use.
1.1.2. Target audience
This document is applicable to:
⚫ Installers
⚫ Users
The qualified and trained installers must have knowledge and experience in:
⚫ Installing electrical equipment. Applying all applicable installation codes.
⚫ Analyzing and reducing the hazards involved in performing electrical work.
⚫ Installing and configuring batteries.
⚫ Selecting and using Personal Protective Equipment (PPE).
1.2. Safety
CAUTION:
ONLY qualified and trained electricians who have read and fully understood all safety regulations
contained in this manual can install, maintain, and repair the equipment. Access to the equipment is
by the use of a tool, lock and key, or other means of security.
1.2.1. Safety levels
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, can result in death or serious injury or moderate injury.