SAJ VM1000 User Manual

VM1000 Series

‐123‐

001F： PID feedback loss at running time
0028： time-out fault of rapid current limit
0029： reserved
Table 6-14 VM1000 Fault Information
Data Description of Communication Fault(Fault Code) :
communication fault address description of fault function
8001
0000： no fault
0001： password error
0002： command code error
0003： CRC checking error
0004： invalid address
0005： invalid parameters
0006： invalid parameters modification
0007： 0008： EEPROM under operation
Table 6-15 Datasheet of Communication Faults
Instruction of F Group Communication Parameters :
FC-00
address of AC drive factory value 1
setting range 00~31
When the local address is set as 0, namely broadcast address,realize the broadcast
function of the upper machine（except broadcast address). This is the basis for
realizing point to point communication between upper machine and VFD.
FC-01
Baud rate Factory value 5
Setting range
0 300BPS
1 600BPS

SAJ VM1000 Specifications

General

Brand	SAJ
Model	VM1000
Category	Controller
Language	English