To Next Page

To Previous Page

VM1000 Series



‐125‐



FC-04

communication overtime Factory value 0.0 s

Setting range 0.0 s（invalid），0.1~60.0s

When the function code is set to 0.0 s, the communication timeout parameter is

invalid.

When the function code is set to a valid value, if the time interval between the

communication and the next communication exceeds the communication time-out,

the system will alarm communication error (Err16). Typically, it is set as invalid.

In the continuous communication system, you can monitor the communication

status if the second parameter is set.

FC-05

Communication Read Current

Resolution

Factory value 0

Setting range

0 0.01A

1 0.1A

It is used to determine the output unit of current value when communication reads

output current.



Questions and Answers:

Need help?

Do you have a question about the SAJ VM1000 and is the answer not in the manual?

SAJ VM1000 Specifications

General