VM1000 Series
‐5‐
Warning
◎Do not install or operate the VFD if it is damaged or has missing parts. Otherwise it may
result in equipment damage or physical injuries.
Installation
Warning
◎Please hold the bottom of VFD when installing or moving it. In case that the VFD is
broken or damaged; only holding the shell is not allowed.
◎Keep the VFD away from heat, inflammable and explosive goods; Install VFD on the
metal or other nonflammable objects.
◎If the VFD is mounted in an electric cabinet or other enclosed objects, fans or other cooling
device should be installed inside the cabinet; Setting ventilation opening to ensure ambient
temperature is below 40℃. Otherwise it may be damaged because of high temperature.
Danger
◎Wiring must be completed by qualified electrical engineers. Otherwise it can cause an
electrical shock or VFD damage.
◎Before wiring, make sure the power supply is de-energized. Otherwise it will cause an
electrical shock or a fire.
◎Make sure the ground terminal is grounded safely and correctly. Otherwise there will
be a risk of electrical shock on the shell of VFD.
◎Do not touch the main circuit terminal, and the main circuit terminals of the VFD are not
allowed to contact the shell. Otherwise it may cause an electrical shock.
◎Braking resistor of the connection terminal is （+）and PB. Do not connect the other terminals;
Otherwise it may cause a fire.
To Next Page
Loading...
