Sakura Tissue-Tek TEC 6 User Manual

1. Introduction
29
[1] Auto button
When you want to perform
the auto operation, touch this
button to set the start time and
end time for the auto operation
and select the Auto Cryo mode
for the Cryo Module. Refer to
2.2.3 Setting the Schedule of
the Auto Operation (with the
Auto Cryo Mode) for the setting
methods and 2.3.1 Operation
Method for the operation mode.
[2] Manual button
Touch this button to perform
manual operation. Refer to
2.3.1 Operation Method for the
operation mode.
[3] Quick Heating button
Touching this button raises the
set temperatures for the parafn
chamber and warming chambers
by 5°C. Touching the button
again during quick heating
cancels quick heating. Refer to
3.2.2 Melting Paraffin Quickly
for details.
This button is not displayed
while the instrument is paused.
[4] Cleaning mode button
Use this button to lower the
temperatures of the forceps
holder and hot plate.
This button is not displayed
while the instrument is paused.
Refer to 2.2.5 Setting the Auto
Panel Display Off Timer for
information on cleaning the
forceps holder.
[5] Maintenance button
Use this button to move to the
Maintenance Menu screen. On the
Maintenance Menu screen, you
can set the date/time, date format,
language and auto panel display
off time and check the error log.
[1]
[3]
[2]
[4]
[5] [6]
•Main Menu Screen (Manual Operation)
•Main Menu Screen (Auto Operation)
[1]
[3]
[2]
[4]
[5] [6]

Sakura Tissue-Tek TEC 6 Specifications

General

Brand	Sakura
Model	Tissue-Tek TEC 6
Category	Control Unit
Language	English