Salus iT500 - Page 56

iT500 User Reference Manual
56
5. The minute setting then ashes. Adjust and conrm it in the same way as the hour setting. Each press of
or increases or decreases the minute setting by 10 minutes.
6. Next, specify the setpoint temperature. The currently programmed temperture for the program will ash.
Use the
and buttons to increase or decrease the temperature by 0.5 °C or 0.5 °F, and press to
conrm.
7. Programming for program 1 is now complete. The unit then switches to program 2, as indicated by the
displayed program number:
8. Repeat steps 4 to 6 for program 2, and then for programs 3 to 6 in turn.
9. If the weekdays group of days was selected, the unit then switches to the weekend group of days so that
you can specify the separate programs for the weekend.