Samson 3374-11 - Page 27

EB 8331-4 EN 27
Measures for preparation
+OUT I
–
OUT B +
L
N
–OUT U/I
+OUT U
+1 IN
–1 IN
+2IN
–2IN
+3IN
–3IN
+4IN
OUT B –
4IN
Binary output
Inputs 1 to 4
(see section8.4.2 for assignment)
0/4 to 20mA
0/2 to 10V
Position feedback
Power supply
(depending on version 24VAC and DC; 85 to 264VAC)
41 44 42 51 54 52
41 44 42 51 54 52
41 44 42 51 54 52
41 44 42 51 54 52
Options:
Mechanical limit contacts Electronic limit contacts
Table4: Cables and stranded wires that can be used
Cable Cross section
Single-wire H05(07) V-U
1)
0.2 to 1.5mm²
Fine-wire H05(07) V-K
1)
0.2 to 1.5mm²
With wire ferrule acc. to DIN46228-1 0.25 to 1.5mm²
With wire ferrule and sleeve acc. to DIN46228-4 0.25 to 0.75mm²
1)
8mm stripped insulation at cable end
Fig.8: Electrical connection