Samson 3374-11 - 9.4 End position guiding

EB 8331-4 EN 53
Congurationlevel
A
B
AB
AB
A
B
A
AB
B
AB
A
B
Mixing valve for mixing service
Diverting valve for mixing service
For diverting service
For diverting service
Flow pipe
Flow pipe
Flow pipe
Flow pipe
Return ow pipe
Return ow pipe
Return ow pipe
Return ow pipe
Fig.21:Operating principle of three-way mixing and diverting valves
Code Description WE Adjustment range
c42 Direction of action >> >> (increasing/increasing)
<> (increasing/decreasing)
9.4 End position guiding
The actuator stem moves to the end positions earlier if the end position guiding function is
active.
9.4.1 Operatingdirectionincreasing/increasing
− Endpositionguiding(stemretracts)(c35): The actuator stem moves the valve to the top
end position if the input signal reaches the value entered in this code. Setting c35 =
100.0% causes this function with a retracting actuator stem to be deactivated.
− Endpositionguiding(stemextends)(c36): The actuator stem moves the valve to the
lower end position if the input signal reaches the value entered in this code. Setting c36
= 0.0% causes this function with an extending actuator stem to be deactivated.