Samson 3374-11 - Rotary Pushbutton; Menu Control

38 EB 8331-4 EN
Operation
7.2 Rotary pushbutton
The rotary pushbutton is used for on-site operation of the actuator.
Turn
: select/change codes and values
Press
: conrm setting/change
Changed parameters are immediately effective!
The process is directly affected by these changes.
First check any changes made to parameters before conrming them by pressing the rotary
pushbutton.
7.2.1 Menu control
Activatingthelevel/parameters
Î
icon indicates a jump to another level with further options.
1. Turn
to select the required code.
2. Press to conrm. The code is selected.
Example shown: Conguration level Code 10 selected
Setting parameters
1. Press
. The reading blinks on the display.
2. Turn until the required setting is reached.
3. Press
to conrm the setting.
Example shown: source Code c01 set to mA.
Exit level
Î Press
to exit the level.
Example shown: Information level exited.
NOTICE
!