88 EB 8331-4 EN
Decommissioning and disassembly
17.2.4 Information level
Code Parameters (read only) Reading/unit Section
Input signal
i01 Lower range value of input signal V or mA
1)
9.2
i02 Upper range value of input signal V or mA
1)
9.2
i03 Positioning value %/state 9.2
i04 Unit V or mA
1)
9.2
Control
i05 Process variable %/°C/bar/without unit
i06 Set point %/°C/bar/without unit
i07 Set point deviation %
i08 Active controller State
i09 Positioning value %
Travel
i11 Actuator travel % 9.11
i12 Actuator travel mm 9.11
Position feedback signal
i21 Lower range value of position feedback signal V or mA
1)
9.5
i22 Upper range value of position feedback signal V or mA
1)
9.5
i23 Position feedback signal % 9.5
i24 Position feedback signal V or mA
1)
9.5
Binary signals
i31 Binary input status ON/OFF 9.6
i32 Binary output status ON/OFF 9.7
Limit contact
i41 Status of limit switch (stem retracted) ON/OFF 9.4
i42 Status of limit switch (stem extended) ON/OFF 9.4
Conguration
i51 Direction of action >>/<> 9.3
i52 Limited travel range % 9.11
i53 Transit time s 9.11
i54 Application POSI/PID/2STP/3STP/POSF 8.4
1)
The mA unit is represented in the display by the icon .