Samson 3374-11 - Page 63

EB 8331-4 EN 63
Congurationlevel
Openfastcongurationlevel
1. Turn
(when the start screen appears) to select Code 8 (dis-
play: FCO).
2. Press . First setting that can be selected appears.
Selectable setting
Î Code In, input signal 0 to 20mA
Select setting
3. Press
to select setting (indicated by the dashes).
4. Turn to open other selectable settings
(see list on page62).
Example shown: Code dir, operating direction increasing/in-
creasing selected.