Samson 373 Series Operating Instructions

118 EB 8389 EN
Appendix
Code
No.
Parameter – Readings/
values [default setting]
Description
Codes with marked with an asterisk (*) must be enabled with Code3 prior to conguration.
48* L1 Actual Mode DI2 Current operating mode
1)
L2 DI2 Trd PV_D.Value
Discrete input variable and its status
L3 DI2 Trd PV_D.State
L4 DI2 Fb Target Mode Target operating mode
L5 DI2 Fb Actual Mode Current operating mode
L6 DI2 Fb OUT_D.Value
Discrete output variable and its status
L7 DI2 Fb OUT_D.State
L8 DI2 FSAFE_VAL_D Default when the sensor registers an error
L9 Simulate Simulation
1)
Actual/desired operating mode:
Operating mode Indicated value (display)
Auto 8
MAN 16
External cascade (RCAS) 2
Out of service (O/S) 128
9.1.2 FOUNDATION™ eldbus parameters (Type3730-5,
Type3731-5)
Code
No.
Parameter – Readings/
values [default setting]
Description
Codes with marked with an asterisk (*) must be enabled with Code3 prior to conguration.
48* F0 Firmware rev.
Communication
F1 Binary input 1 0 Not active = NO
1 Active = YES
F2 Binary input 2 0 Not active = NO
1 Active = YES

Samson 373 Series Specifications

General

Brand	Samson
Model	373 Series
Category	Valve Positioners
Language	English